Squid - Proxy Server

Squid is a full-featured web proxy cache server application which provides proxy and cache services for Hyper Text Transport Protocol (HTTP), File Transfer Protocol (FTP), and other popular network protocols. Squid can implement caching and proxying of Secure Sockets Layer (SSL) requests and caching of Domain Name Server (DNS) lookups, and perform transparent caching. Squid also supports a wide variety of caching protocols, such as Internet Cache Protocol, (ICP) the Hyper Text Caching Protocol, (HTCP) the Cache Array Routing Protocol (CARP), and the Web Cache Coordination Protocol. (WCCP)

The Squid proxy cache server is an excellent solution to a variety of proxy and caching server needs, and scales from the branch office to enterprise level networks while providing extensive, granular access control mechanisms and monitoring of critical parameters via the Simple Network Management Protocol (SNMP). When selecting a computer system for use as a dedicated Squid proxy, or caching servers, ensure your system is configured with a large amount of physical memory, as Squid maintains an in-memory cache for increased performance.
Installation

At a terminal prompt, enter the following command to install the Squid server:

sudo apt-get install squid squid-common

Configuration

Squid is configured by editing the directives contained within the /etc/squid/squid.conf configuration file. The following examples illustrate some of the directives which may be modified to affect the behavior of the Squid server. For more in-depth configuration of Squid, see the References section.
[Tip]



Prior to editing the configuration file, you should make a copy of the original file and protect it from writing so you will have the original settings as a reference, and to re-use as necessary.

Copy the /etc/squid/squid.conf file and protect it from writing with the following commands entered at a terminal prompt:

sudo cp /etc/squid/squid.conf /etc/squid/squid.conf.original
sudo chmod a-w /etc/squid/squid.conf.original

*

To set your Squid server to listen on TCP port 8888 instead of the default TCP port 3128, change the http_port directive as such:

http_port 8888
*

Change the visible_hostname directive in order to give the Squid server a specific hostname. This hostname does not necessarily need to be the computer's hostname. In this example it is set to weezie

visible_hostname weezie
*

Again, Using Squid's access control, you may configure use of Internet services proxied by Squid to be available only users with certain Internet Protocol (IP) addresses. For example, we willll illustrate access by users of the 192.168.42.0/24 subnetwork only:

Add the following to the bottom of the ACL section of your /etc/squid/squid.conf file:

acl fortytwo_network src 192.168.42.0/24

Then, add the following to the top of the http_access section of your /etc/squid/squid.conf file:

http_access allow fortytwo_network
*

Using the excellent access control features of Squid, you may configure use of Internet services proxied by Squid to be available only during normal business hours. For example, we'll illustrate access by employees of a business which is operating between 9:00AM and 5:00PM, Monday through Friday, and which uses the 10.1.42.0/42 subnetwork:

Add the following to the bottom of the ACL section of your /etc/squid/squid.conf file:

acl biz_network src 10.1.42.0/24 acl biz_hours time M T W T F 9:00-17:00

Then, add the following to the top of the http_access section of your /etc/squid/squid.conf file:

http_access allow biz_network biz_hours

[Note]

After making changes to the /etc/squid/squid.conf file, save the file and restart the squid server application to effect the changes using the following command entered at a terminal prompt:

sudo /etc/init.d/squid restart


2 komentar:

arisyi ihsan mengatakan...

sebenernya selain squid masih ad lagi ga software proxy server yang lebih bagus???

Unknown mengatakan...

Gan, bagaimana ketika ada kasus bahwa kita sudah mengeblok suatu situs. tetapi, situs tersebut masih bisa diterobos menggunakan proxy fire... bagaimana cara mengatasi kasus tersebut...?